Wait until overheating devices have cooled down before touching them to avoid injury.
4.2.2 Unpacking the Compute Node
Procedure
Step 1 Check whether the packing case and seals are in good conditions.
NOTE
If the packing case is soaked or deformed, or the seals or pressure-sensitive adhesive tapes are not intact,
fill in the Cargo Problem Feedback Form.
Step 2 Use a box cutter to open the packing case.
Exercise caution with the box cutter to avoid injury to your hands or damage to devices.
Step 3 Unpack the packing case.
Figure 4-2 Unpacking the packing case
FusionServer Pro CH121 V5 Compute Node
User Guide
4 Installation and Configuration
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 73
To Next Page
Loading...
