The initial password of the iBMC is changed.
----End
4.3.4 Checking the Compute Node
Process
Check the compute node by performing the following operations:
Figure 4-8 Check process
Procedure
Step 1 Check the indicators on the panels and ensure that the device is working properly.
For details, see 2.1.2 Indicators and Buttons.
Step 2 Log in to the MM910 WebUI.
For details, see 12.3 Logging In to the MM910 WebUI.
Step 3 Query version information.
1. On the menu bar, choose Chassis Information.
2. Click the compute node in the specific slot and choose Version Information to query
the version information of the compute node.
FusionServer Pro CH121 V5 Compute Node
User Guide
4 Installation and Configuration
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 80
To Next Page
Loading...
