Figure 4-17 Selecting a language
Step 3 Select the language to be used and press Enter.
The target language is set for the GUI.
----End
4.3.7.6 Restarting the Compute Node
After the settings, you need to restart the compute node for the settings to take effect.
Procedure
Step 1 On the BIOS, press F10.
The Save Changes&Exit dialog box is displayed.
Step 2 Select Yes and press Enter.
Settings are saved and the BIOS is exited. The compute node automatically restarts for the
settings to take effect.
----End
4.3.8 Installing an OS
The CH121 V5 supports multiple types of OSs.
l Use Intelligent Computing Compatibility Checker to obtain information about the
compatible operating systems.
FusionServer Pro CH121 V5 Compute Node
User Guide
4 Installation and Configuration
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 91
To Next Page
Loading...
