Step 10 Install the cover.
For details, see 3.6 Installing the Cover.
Step 11 Install the compute node.
For details, see 3.4 Installing a CH121 V5.
Step 12 Power on the compute node.
For details, see 3.2 Power-On Procedure.
----End
3.9 Removing the PCIe Card Panel
Procedure
Step 1 Power off the compute node.
For details, see 3.1 Power-Off Procedure.
Step 2 Remove the compute node.
For details, see 3.3 Removing a CH121 V5.
Step 3 Place the compute node on the ESD workstation.
Step 4 Remove the cover.
For details, see 3.5 Removing the Cover.
Step 5 Determine the position of the PCIe card panel.
Step 6 Loosen the two screws that secure the PCIe card panel and lift the PCIe card panel vertically.
See (1) and (2) in Figure 3-15.
Figure 3-15 Removing a PCIe card panel
FusionServer Pro CH121 V5 Compute Node
User Guide
3 Basic Operations
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 39
To Next Page
Loading...
