EasyManua.ls Logo

Huawei FusionServer Pro 1288H V5 User Manual

Huawei FusionServer Pro 1288H V5
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FusionServer Pro 1288H V5 Server
V100R005
User Guide
Issue 13
Date 2020-06-05
HUAWEI TECHNOLOGIES CO., LTD.

Table of Contents

Other manuals for Huawei FusionServer Pro 1288H V5

Question and Answer IconNeed help?

Do you have a question about the Huawei FusionServer Pro 1288H V5 and is the answer not in the manual?

Huawei FusionServer Pro 1288H V5 Specifications

General IconGeneral
ProcessorIntel Xeon Scalable processors
MemoryUp to 3 TB
Memory Slots24 DDR4 DIMM slots
StorageSupports up to 10 x 2.5-inch SAS/SATA/SSD drives or 4 x 3.5-inch SAS/SATA drives
RAID SupportRAID 0, 1, 10, 5, 50, 6, 60
Network2 x GE + 2 x 10GE ports
Power Supply1+1 redundant, hot-swappable PSUs
Form Factor1U rack
Number of ProcessorsUp to 2

Summary

1 Overview

2 Hardware Description

2.1 Front Panel

Covers the appearance, indicators, and ports on the server's front panel.

2.2 Rear Panel

Covers the appearance, indicators, and ports on the server's rear panel.

2.4 Memory

Details memory configurations, compatibility rules, and installation guidelines.

2.5 Storage

Information on supported drive configurations, numbering, and indicators.

3 Product Specifications

3.1 Technical Specifications

Lists key technical details like form factor, chipset, processors, memory, storage, and network.

4 Software and Hardware Compatibility

5 Safety Instructions

5.1 Safety Instructions

General, personal, equipment, and transportation safety guidelines.

6 ESD

6.1 ESD Prevention

Guidelines for preventing electrostatic discharge damage to components.

6.2 Grounding Methods for ESD Prevention

Methods for proper grounding to prevent electrostatic discharge.

7 Installation and Configuration

7.1 Installation Environment Requirements

Specifies requirements for the server's installation location, space, and airflow.

7.2 Hardware Installation

Step-by-step guide for installing server hardware, including rails and server.

7.3 Power-On and Power-Off

Procedures for powering the server on and off using various methods.

7.4 Initial Configuration

Steps for the initial setup, including passwords, IP addresses, and BIOS settings.

8 Troubleshooting

9 Common Operations

9.2 Logging In to the iBMC WebUI

Step-by-step guide to access the iBMC web interface for server management.

9.6 Accessing the BIOS

Procedures for entering and navigating the server's BIOS setup utility.

11 Software and Configuration Utilities

A Appendix

Related product manuals