Huawei FusionServer Pro 1288H V5 - Ports

Indicator Description
Connection status
indicator for a GE
electrical port
● O: The network port is not connected.
● Steady green: The network port is properly
connected.
Data transmission
status indicator for a
GE electrical port
● O: No data is being transmitted on the port.
● Steady yellow: The network port is in active status.
● Blinking yellow: Data is being transmitted.
Connection status
indicator/Data
transmission status
indicator for a 10GE
electrical port
● O: The network port is not connected.
● Blinking green: Data is being transmitted.
● Steady green: The network port is properly
connected.
Data transmission rate
indicator for a 10GE
electrical port
● O: The network port is not connected.
● Steady green: The data transmission rate is 10
Gbit/s.
● Steady yellow: The data transmission rate is 1
Gbit/s.
Connection status
indicator/Data
transmission status
indicator for a 10GE
optical port
● O: The network port is not connected.
● Blinking green: Data is being transmitted.
● Steady green: The network port is properly
connected.
Data transmission rate
indicator for a 10GE
optical port
● O: The network port is not connected.
● Steady green: The data transmission rate is 10
Gbit/s.
● Steady yellow: The data transmission rate is lower
than 10 Gbit/s.
2.2.3 Ports
Port Positions
Figure 2-12 Ports on the rear panel
FusionServer Pro 1288H V5 Server
User Guide 2 Hardware Description
Issue 13 (2020-06-05) Copyright © Huawei Technologies Co., Ltd. 14