Huawei FusionServer Pro CH121 V5 - Installing the Pcie Card Panel

Step 7 Place the removed component in an ESD bag.
----End
3.10 Installing the PCIe Card Panel
Procedure
Step 1 Power off the compute node.
For details, see 3.1 Power-Off Procedure.
Step 2 Remove the compute node.
For details, see 3.3 Removing a CH121 V5.
Step 3 Place the compute node on the ESD workstation.
Step 4 Remove the cover.
For details, see 3.5 Removing the Cover.
Step 5 Check whether a PCIe card is installed.
l If yes, go to Step 6.
l If no, go to Step 7.
Step 6 Remove the PCIe card.
For details, see 3.11 Removing a PCIe Card.
Step 7 Take the spare part out of its ESD bag.
Step 8 Determine the position of the PCIe card panel.
Step 9 Install the PCIe card panel.
1. Vertically slide the PCIe card panel into the slot, and align the screw holes on the PCIe
card panel with those on the pane. See (1) in Figure 3-16.
2. Tighten the two screws to secure the PCIe card panel. See (2) in Figure 3-16.
FusionServer Pro CH121 V5 Compute Node
User Guide
3 Basic Operations
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 40