Huawei FusionServer RH2288H V3 - Network Configuration

Huawei SAP HANA Appliance Single Node Installation
Guide (RH2288H V3+Broadwell+SLES11 SP4 For B1)
4 Installing the OS and Related Software
Issue 01 (2017-01-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
38
Figure 4-26 OS desktop
----End
4.3 Network Configuration
Step 1 Open yast2 in Terminal as shown in Figure 4-27.Configure a network for the server, run the
yast2 command, and press Enter, as shown in Figure 4-28.
Figure 4-27 Open in Terminal