EasyManua.ls Logo

Huawei FusionServer RH2288H V3 - Installing an os

Huawei FusionServer RH2288H V3
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Huawei SAP HANA Appliance Single Node Installation
Guide (RH2288H V3+Broadwell+SLES11 SP4 For B1)
4 Installing the OS and Related Software
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
28
4.2 Installing an OS
Step 1 On the installation page, select Install SLES11 SP4 B1, and press Enter, as shown in Figure
4-6.
Figure 4-6 Installation page
Step 2 If the machine has more than one disk, choose the smaller one with approximately 600 GB for
installing the operating system, confirm your choice by pressing SPACE, and then choose OK,
as shown in Figure 4-7. Note that the drive names, sizes, and numbers may differ on your
machine from the example screenshot. Example: IBM setup
Figure 4-7 Select disk for operating system

Related product manuals