Need help?Do you have a question about the Huawei FusionSolar SUN2000 and is the answer not in the manual?
General| Max. Efficiency | 98.6% |
|---|---|
| Category | Inverter |
| Output Frequency | 50 Hz / 60 Hz |
| Cooling Method | Natural convection |
| Operating Temperature Range | -25 °C to +60 °C |
| Protection Rating | IP65 |
| Model | SUN2000 |
| Communication | RS485 |
Describes the commissioning process after device replacement for the FusionSolar smart PV solution.
Identifies the target readers for this document as PV plant operators and qualified electricians.
Defines various symbols used in the document, including DANGER, WARNING, CAUTION, and NOTICE.
Lists common system configurations using Huawei inverters, SmartLoggers, and SmartPVMS or third-party systems.
Guides on downloading, installing, and logging into the FusionSolar and SUN2000 mobile apps.
Steps to access and log in to the SmartLogger Web User Interface using a browser.
Procedure for logging into the SmartLogger1000 via its Liquid Crystal Display (LCD) panel.
Instructions for logging into the SmartPVMS web-based management system.
Configuration steps for replacing a SUN2000 inverter, especially when deployed with a SmartLogger.
Procedures for configuring SmartLogger settings when replacing a SUN2000.
Steps to update settings in SmartPVMS or third-party systems after SUN2000 replacement.
Procedures for exporting and importing configurations for SmartLogger replacement.
Instructions for updating settings in SmartPVMS or third-party systems after SmartLogger replacement.
Steps to replace an SDongleA-03 (4G) with another SDongleA-03, including SIM card considerations.
Procedure for replacing an SDongleA-05 (WLAN-FE) with another SDongleA-05.
To Next Page