5 Configuration of WLAN Parameters
HUAWEI HG231f Wireless-N Router
User Guide
5-2 Issue 01 (2010-04-01)
a wireless
Step 1
ration utility.
ee section 4.1 “Logging In to the
2. ose Basic > WLAN.
3.
K/WPA2-PSK
: MyPassword@2009
AES
: AP PIN
Step 3
gh the configuration software of the wireless network adapter.
Step 5
e WPS PIN in the Wireless Network Adapter's software configuration utility.
Step 6
Click the corresponding connection as prompted.
a wireless connection between your PC and the router quickly. To set up
connection, do as follows:
Set the WLAN parameters of router, and set the
WPS mode
to
AP PIN
.
1. Log in to the Web-based configu
To log in to the Web-based configuration utility, s
Web-Based Configuration Utility”.
In the navigation tree, cho
Set the following parameters as planned.
− SSID: MyNewSSID
− Security Mode: WPA-PS
− WPA Pre-Shared Key
− WPA Encryption:
− WPS Mode
4. Click Reset PIN.
5. Click Submit.
Step 2
Record the WPS PIN in the
AP PIN
text box.
Detect a WLAN throu
Step 4
In the Wireless Network Adapter's software configuration utility, select
MyNewSSID
from the WLAN list.
Enter th
---End
z After finishing the configuration, if the other PCs need to set a wireless connection
through the AP PIN mode, please repeat Step 3 to Step 6.
z Click Reset PIN, the WPS PIN are restored to the default settings. You can check the
label on the back panel of the router for the default WPS PIN.
5.3 Se
S function, you can set up a wireless
lly. To manually set up a wireless
con
etails, see the user guide of your network adapter.
z
Use the wireless configuration software provided by the operating system of your
PC.
z Click Generate PIN, the router will generate a new WPS PIN randomly.
tting Up a Wireless Connection Manually
If your network adapter does not support the WP
connection between your PC and the router manua
nection, use either of the following methods:
z
Use the tool provided by your network adapter.
For d
To Next Page
Loading...
Need help?
General
