Huawei HG231f - Page 53

6 Configuring Frequently Used Functions
HUAWEI HG231f Wireless-N Router
User Guide
6-20 Issue 01 (2010-04-01)
The WLAN configuration page is displayed.
2. Click WLAN WDS.
3. Select Enable.
4. Select Repeater for WDS Mode.
5. Click
.
6. Select mySSID for Select SSID.
7. In MAC Address, enter BB:BB:BB:BB:BB:BB.
This MAC address is the wireless MAC address of router B and is recorded in
Step 1.
8. Click Submit.
Step 4
Set the WLAN parameters of router B.
1. Log in to the Web-based configuration utility of router B.
2. In the navigation tree, choose Basic > WLAN.
The WLAN configuration page is displayed.
3. Set the following parameters.
− Country Code: 1
− SSID Index: SSID1
− SSID: mySSID
− Enable SSID: Enable
− Security Mode: WPA-PSK/WPA2-PSK
− WPA Encryption: AES
− WPA Pre-Shared Key: MyPassword@2009
4. Click Submit.
Step 5
Configure the WDS function of router B.
1. In the navigation tree, choose Basic > WLAN.
The WLAN configuration page is displayed.
2. Click WLAN WDS.
3. Select Enable.
4. Select Repeater for WDS Mode.
5. Click
.
6. Select mySSID for Select SSID.
7. In MAC Address, enter AA:AA:AA:AA:AA:AA.
This MAC address is the wireless MAC address of router A and is recorded in
Step 1.
8. Click Submit.
Step 6
Change the IP address of the LAN interface of router B.
1. In the navigation tree, choose Basic > LAN.
The LAN configuration page is displayed.
2. Under LAN Host Settings, enter 192.168.1.101 in IP address.
3. Under LAN Host Settings, click Submit.
Step 7
Disable the DHCP server function of router B.