36
9.2.1 Using the Configuration Tool
If the HG659b parameter settings were configured incorrectly, log in
to the web management page to reload the default configuration file
and restore the user to its default settings. Perform this operation with
caution. After the user is restored to its default settings, all custom
data and settings will be lost, and the password will be restored to
user.
Step 1
Log in to the web management page.
Step 2
In the navigation tree, choose Maintain > Device
Management.
Step 3
In Factory Restore, click Reset.
Step 4
In the displayed dialog box, click OK.
9.2.2 Using the Reset Button
If you forget the login password to the web management page or
could not access the web management page, use the Reset button on
the HG659b rear panel to restore the HG659b to its default settings.
Perform this operation with caution. After the HG659b is restored to
its default settings, all custom data and settings will be lost, and the
password will be restored to user.
Step 1
Press the HG659b power button to power the HG659b on.
Step 2
Press and hold the Reset button for 8 seconds to 10 seconds.
The HG659b will restart, which will cause temporary network
interruptions.
After the HG659b
is restored to its default settings, change the
computer IP address so that it is in the same network segment as
the 192.168.1.254 default IP address.
To Next Page
Loading...
Need help?
General
