Huawei ideos S7 - Mobile Networks; Opening Mobile Network Settings; Turn Data Roaming on or off; Setting GSM;UMTS Options

19
1. Touch and hold the device in the Bluetooth devices list on the
Bluetooth settings screen.
2. Touch Options… in the menu that opens.
3. A screen opens with a list of profiles of the device.
4. Touch a profile to make it checked or checked to use it or not.
5. When you are finished, press the Back key.
2.3 Mobile networks
Your Tablet with a SIM card is configured to use the mobile networks
of your wireless service provider for voice calls and for transmitting
data.
If your Tablet does not connect to a network when you insert a
card and turn it on, contact your service provider to obtain
the details of its access point.
SIM
2.3.1 Opening Mobile network settings
1. Open the Settings list.
2. Touch Wireless & networks , and then touch Mobile networks .
2.3.2 Turn Data roaming on or off
When Data roaming is on, your Tablet transmit data over mobile
networks of other carriers when you leave the service area of mobile
networks of your carriers. To turn Data roaming on or off, do as the
following steps.
1. Open the Mobile networks settings screen.
2. Turn Data roaming on or off by touch Data roaming to make it
checked or unchecked.
With Data roaming off, you can still transmit data with a Wi-Fi
onnection. c
2.3.3 Setting GSM/UMTS options
If you and your wireless service provider determine that you need to
change the settings of your current access point name (APN) or to
create a new one, you must obtain the APN and detailed settings
from your provider.
1. Open the Mobile networks settings screen, and touch
GSM/UMTS Options > Access Point Names .
2. Touch an existing APN to edit it. Or press the Menu key and
touch New APN . Enter the APN settings offered by your service
provider by touching each setting that you need to edit.
3. When you are finished, press the Menu key and touch Save . If
you created a new APN, touch it in the APNs screen to start using
it.