Step 2 Loosen the set screw on the front cover to disassemble the camera with the supplied Allen key.
Figure 3-3 Disassemble the Camera
Step 3 Fix the adapter plate to the ceiling with the supplied expansion screws.
NOTE
If the supplied drill template is type II drill template, you can just skip Step3 and go straight to Step4.
Step 4 Fix the dome drive with the supplied screws.
Figure 3-4 Fix the Dome Camera
IPC6332-MIR
Quick Start Guide 3 Installation
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
To Next Page
Loading...
