Enable Colour Inversion
Colour inversion allows you to invert the colour of the text and the background. When Colour
inversion is enabled, your device will display text in white and the background black.
On the Accessibility screen, enable Colour inversion.
Enable or Disable an Accessibility Feature, by Using a Shortcut
Enable or disable an accessibility feature just by pressing the Volume buttons.
1 To do so, on the Accessibility screen, touch Accessibility shortcut, and enable
Accessibility shortcut.
2 Touch Select feature to select the feature that you wish to enable with the shortcut, like
Colour correction.
3 Then press and hold the Volume up and down buttons simultaneously for 3 seconds to
enable the feature. Do the same to disable the feature.
Adjust the Screen Touch Duration
You can adjust the touch duration and long touch duration, and set the time within which
repeated touches will be ignored.
On the Accessibility settings screen, touch Touchscreen settings, then you can perform the
following:
• Touch Touch duration, and set the touch duration as required.
• Touch Touch & hold duration, and set the long touch duration as required.
• Enable Ignore repeated touches, and drag the slider to set the time interval for repeated
screen touches as required.
Connect to a Hearing Aid Device via Bluetooth
Link your device with a hearing aid device that supports Bluetooth low energy technology, to
hear calls and audio loud and clear.
1 Swipe down from the upper right corner of the device to display Control Panel, and
enable Bluetooth.
2 Pair your device with a hearing aid device that supports Bluetooth low energy technology
via Bluetooth.
3 Once the connection is established, simply put on your hearing aid device to answer calls
and listen to audio directly on it.
You can also manually switch the playback device.
• MeeTime/Voice calls: On the call screen, touch
to switch between them.
If there is no option on the call screen, it means that you won't be able to use
the hearing aid device to answer calls.
Settings
134