Controlling a projected app: Touch the projected app in the oating ball to display the app's
oating window, which can be used to control the app. You can also adjust the volume on
the large-screen device from the oating window.
• Apps in split-screen or oating-window mode can't be projected.
• To safeguard your privacy, this feature can't be used once your device screen has been
locked.
You can exit app projection in any of the following ways:
• Go to > Mirror screen to exit wireless projection.
• Touch in Control Panel to expand the shortcut switch panel (depending on your
device model), and touch Wireless Projection to exit wireless projection.
• Swipe down from the upper left edge of your device to display the notication panel, and
touch DISCONNECT to exit wireless projection.
Use Eye Comfort Mode
Eye comfort mode can eectively reduce harmful blue light and adjust the screen to display
warmer colours, relieving eye fatigue and protecting your eyesight.
Enable or Disable Eye Comfort Mode
• Swipe down from the upper right edge of the screen to display Control Panel and touch
to expand the shortcut switches panel. Enable or disable Eye Comfort. Touch and hold
Eye Comfort to access the settings screen.
• Go to Settings > Display & brightness > Eye Comfort and enable or disable Enable all
day.
Once Eye Comfort mode is enabled, will be displayed in the status bar, and the screen
will take on a yellow tint since less blue light is being emitted.
Set a Schedule for Eye Comfort Mode
Go to Settings > Display & brightness > Eye Comfort, enable Scheduled, then set Start and
End according to your preferences.
Adjust the Blue Light Filter in Eye Comfort Mode
Go to Settings > Display & brightness > Eye Comfort, enable Enable all day or set up
Scheduled, and adjust the slider under Filter level to customise how much blue light you
would like to be ltered.
Settings
123
To Next Page
Loading...
