2 When you start shooting, the viewnder of the connected device will be displayed on this
device during live video streams or photography in a third-party app on this device. This
device picks up sound during the recording.
3 To switch devices while shooting, you can use any of the following methods on this device:
• Touch on the top of the screen, and touch the name of the device that you wish
to connect to in the displayed list.
• Swipe down from the upper right edge of this device to display Control Panel, and
touch the name of the device that you wish to connect to in Super Device.
• In Super Device, touch
. Then drag the icon for the connected device away from
the icon for this device, and drag the icon for the new device to the icon for this device.
To end the connection, touch or on the connected device.
If Super Device does not display in Control Panel, go to > Show Super Device in
Control Panel.
Adjust Camera Settings
Adjust Camera Settings
You can adjust the camera settings to take photos and videos more quickly.
The following features may not be available in some camera modes.
Adjust the Aspect Ratio
Go to Camera >
> Aspect ratio and select an aspect ratio.
This feature is not available in some modes.
Enable Location Tags
To enable Location tag, enable Location Services for your device rst, then go to Camera >
. Your photos and videos will then be tagged with location information.
You can touch and swipe up on a photo or video in Gallery to view its shooting location.
To enable Location Services on your device:
• Swipe down from the upper right edge of the device to display Control Panel, touch
to
expand the shortcut switches panel, and enable Location.
• Go to Settings > Location and enable Access my location.
Add Device Watermarks
Go to > Add watermark, turn on Stickers, and select your preferred watermark.
Camera and Gallery
96
To Next Page
Loading...
