Huawei Mate X3 - Essentials; Charge in Turbo charging Mode

Charge in Turbo charging Mode
Enable Turbo charging to give your phone a quick boost when you need it most.
• Before using this feature, make sure that the permission has been granted for
Optimiser.
• When your phone is charging in Turbo charging mode, its temperature may increase
slightly. This is normal and does not indicate any issue with your device.
1 Remember to charge your phone using the standard charger and data cable that came
with it.
2 You can enable Turbo charging in any of the following ways:
• Before the charging animation eects disappear, when Touch & hold the centre of
the screen to Turbo charge displays at the top of the screen, touch and hold down on
the centre of the screen, until your phone vibrates and Turbo charging displays.
• Unlock the screen, swipe down from the upper left edge of the screen to display
Notication Panel, and touch Turbo charge in the Turbo charge message box.
If you wish to disable Turbo charging mode, touch Stop Turbo charging in the Turbo
charge message box on Notication Panel, or remove and re-insert the data cable. If you
select Ignore, the Turbo charge message box will appear after your phone has restarted.
Wireless Reverse Charging
Wireless reverse charging allows your device to charge other devices that support this
feature, including phones, tablets, watches, and bands.
1 Go to Settings > Battery (or Optimiser > ) and enable Wireless Reverse Charging.
2 Power on the device to be charged and place it on the centre of the back of your device.
Do not place any metal objects between your device and the device to be charged.
3 If the device does not start charging within a few seconds, adjust its position and try
again.
Essentials
45