Huawei Mate X3 - Page 57

The gures are for reference only.
1 Ensure that the Cast+/Miracast switch or the projection switch is enabled on the large-
screen device. For details about how to turn on the switch, refer to the product manual or
contact the product manufacturer.
2 Swipe down from the upper right edge of your device to display Control Panel, and touch
and .
3 In Control Panel, touch to expand the shortcut switch panel, and touch Wireless
Projection. Your device will then start searching for available external large-screen
devices.
You can also go to Settings > More connections > Easy Projection to enable
Wireless Projection.
4 Touch the device that you wish to project your device to from the detected devices.
5 Once your device is projected, touch , and select your preferred audio device, either
the device or Vision.
By default, after the connection is successful, banner notications for incoming calls,
messages, and alarms, and Multi-Window are only displayed on your phone instead of the
large-screen device. To change the settings, touch , and turn o the switch for Hide
notications.
The Hide notications feature is only supported on certain products.
Smart Features
54