l If the Wi-Fi network does not require a password, your device will connect automatically.
l If the network is protected, enter the password when prompted and touch Connect.
Once your device is connected to a Wi-Fi network, it will display the icon in the status
bar. Your device will remember Wi-Fi networks that you have used before and reconnect to
them automatically.
Connecting to a Wi-Fi network using WPS
WPS allows your device to connect to a WPS-enabled router without having to remember a
password.
1 Open Settings.
2 Touch Wi-Fi and switch on Wi-Fi.
3 Touch > Advanced Wi-Fi settings. There are four options:
l Touch WPS connection and press the router's WPS button.
l Touch WPS PIN connection to generate a PIN, and then enter the PIN on the router.
Once your device is connected to a Wi-Fi network, it will display the icon in the status
bar. Your device will remember Wi-Fi networks that you have used before and reconnect to
them automatically.
Using Bluetooth to connect your device to other
devices
Enabling Bluetooth and pairing with other devices
1 Open Settings.
2 Touch Bluetooth and switch on Turn on Bluetooth. Your device will automatically list
available devices.
l Ensure Visibility is switched on.
l If the device you want to pair with is not displayed, check that the device is
discoverable.
3 Select the device you want to pair with and follow the onscreen instructions.
Unpairing Bluetooth devices
1 Open Settings.
2 Touch Bluetooth and switch on Turn on Bluetooth.
3 Touch the icon next to the device name and select Unpair.
Network and Sharing
13
To Next Page
Loading...
