Huawei NE40E-M2 Series - Page 119

7 Boards
Issue ()
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
117
Indicator
Status Description
Red:

If the indicator is steady on, the hardware on the PIC is faulty.
Yellow:

If the indicator is steady on, the PIC is installed in a slot for a
HIC and an alarm is reported or the PIC is not loaded with the
logic.
If the indicator is off, the PIC is powered off or is not registered.
L/A(0-8)
Running status indicator
Green:

If the indicator is steady on, the link is normal.

If the indicator is off, the link is Down.

If the indicator blinks, data is being transmitted.
Table 7-136 Service interfaces
Interface
Name
Interfac
e Type
Connec
tor
Type
Description
Cable
OUT0
10GE IN0
10GE
SFP+
Interface for
1-channel
SFP+ optical
signal input and
output
LC optical fiber
OUT1
IN1-OUT8
IN8
FE/GE
SFP
Interfaces for
8-channel SFP
optical signal
input and
output
LC optical fiber/cable
Functional Specifications
Features and
Functions
Remarks
Basic function

Provides 10GBase LAN/WAN-SFP+ interfaces for 10GE SFP+
optical modules and supports 10GE optical interface features and
synchronous Ethernet.

Provides 8 100/1000Base-X-SFP interfaces for GE optical
modules and supports GE optical interface features.

Provides 8 100/1000Base-X-SFP interfaces for FE optical
modules and supports FE optical interface features.

Provides 8 100/1000Base-X-SFP interfaces for SFP modules with
electrical interfaces and supports 100M/1000M autonegotiation