Huawei NE40E-M2 Series - Page 120

7 Boards
Issue ()
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
118
Features and
Functions
Remarks
electrical interface features but not synchronous Ethernet.

Provides 8 100/1000Base-X-SFP interfaces for intermixing of GE
optical modules, FE optical modules, and SFP modules with
electrical interfaces.
Reliability and
availability
Supports hot swap.
Restrictions and
Remarks
The board does not support the OTN mode or FEC function. If a
colored optical module is used and does not support optical amplifier
insertion, the board supports only point-to-point optical transmission.
Technical Specifications
Table 7-137 Interface specifications
Attribute
Description
Optical type supported

8.14 10Gbps SFP+ Optical Module

8.15 10Gbps SFP+ CWDM Optical Module

8.16 10Gbps SFP+ BIDI Optical Module

8.17 10Gbps SFP+ DWDM Optical Module

8.2 155Mbps SFP Electrical Transceiver

8.3 155Mbps eSFP Optical Module

8.4 155Mbps eSFP BIDI Optical Module

8.6 1Gbps Electrical Transceiver

8.9 1.25Gbps eSFP Optical Module

8.11 1.25Gbps eSFP CWDM Optical Module

8.10 1.25Gbps eSFP BIDI Optical Module

8.12 125M~2.67Gbps eSFP DWDM Optical Module
Working mode
Full-duplex
Compliant standard
IEEE 802.3
Frame format
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
Table 7-138 Board specifications
Item
Specification
Dimensions (H x W x D)
19.8mm x 193.8mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24
in.)
Typical power
14.3 W