Huawei NE40E-M2 Series - Page 63

7 Boards
Issue ()
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
61
Indicator
Status Description
STAT
Status indicator
Green:

If the indicator is steady on, the PIC is working properly.
Red:

If the indicator is steady on, the hardware on the PIC is faulty.
Yellow:

If the indicator is steady on, the PIC is installed in a slot for a
HIC and an alarm is reported or the PIC is not loaded with the
logic.
If the indicator is off, the PIC is powered off or is not registered.
L/A 0-9
Running status indicator
Green:

If the indicator is steady on, the link is normal.

If the indicator is off, the link is Down.

If the indicator blinks, data is being transmitted.
Table 7-21 Service interfaces
Interface
Name
Interfac
e Type
Connec
tor
Type
Description
Cable
OUT0
IN0-OUT9
IN9
10GE/GE
SFP+/S
FP
10 interfaces
for 10GE/GE
optical signal
input and
output
LC optical fiber
Functional Specifications
Features and
Functions
Remarks
Basic function
Support for optical signal input and output of 10 10GE/GE interfaces.
Reliability and
availability
Support for hot swap
Restrictions and
Remarks

Not applicable to outdoor scenarios.

The board does not support the OTN mode or FEC function. If a
colored optical module is used and does not support optical
amplifier insertion, the board supports only point-to-point optical
transmission.