Installing the Power Adapter
5
2
Installation
Installing the Power Adapter
1 Make sure that the FWT is switched off.
2 Insert one end of the power adapter into the DC
input port, and the other end into the power sup
-
ply jack.
In normal condition, use an external power adapter
and a battery.
Use the battery only in the case that
the electricity fail
s and the external power adapter is
unavailable. If the battery level is low, the communi
-
cation may be affected. It is recommended that you
charge the battery for 15 minutes before making or
receiving calls.
Installing the Indoor Antenna
1 Make sure that the FWT is switched off.
2 Align the indoor antenna with the antenna port
on the FWT host in the
correct direction, and
then screw the antenna.
Make sure the connec-
tion is secure.
Connecting the FWT to a PC
Note
• Switch the FWT off and then disconnect it
from
the power adapter before connecting.
• Use the data service suite provided by the
manufacturer.
The FWT can be connected to a PC to provide data
services. You can also maintain and debug the FWT
on the PC. You need to purchase the data service
suite. For details,
consult your local agent.
To Next Page
Loading...
Need help?
General
