Mounting the FWT
6
Mounting the FWT
Horizontal Mounting
Place the FWT on a flat surface. Select a cool and
ventilated site for the FWT to dissipate the heat.
Vertical Mounting
1 Pull out the handset retaining clip from the slot
and turn it around. Then push it back so that the
handset will not fall down when FWT is placed
vertically.
2 According to the distance between the two
hooks (
about 7.7cm), hammer two nails into the
wall and leave a 3-mm space at the end of nails.
3 Snap the hooks to the nails.
Validating
1 Press and hold to power on your FWT.
2 The power icon appears normally. The
signal strength icon appears normally.
3 If you can make a call, it indicates that the FWT
is installed correctly.
7.7cm
To Next Page
Loading...
Need help?
General
