Huawei NetEngine 8000 M1A

Connecting Cables
6
Installing AC Power Cables
Check the fuse capacity of the external power supply.
Select a cabling mode according to the actual AC power supply port type
of the device.
Device Model Recommended Fuse Capacity
NetEngine 8000 M1A
ATN 910C-G
NetEngine 8000 M1C
OptiX PTN 916-F
ATN 910C-K/M
ATN 910D-A
≥1.5 A
For hierarchical power supplying protection, the current
of the circuit breaker at the user side should be no less
than 1.5 A.
≥2 A
For hierarchical power supplying protection, the current
of the circuit breaker at the user side should be no less
than 2 A.
≥4 A
For hierarchical power supplying protection, the current
of the circuit breaker at the user side should be no less
than 4 A.
2
1
1