Huawei P50 Pro - Page 44

Project Your Phone Screen Wirelessly
Project your phone wirelessly to stream movies and work on a bigger screen (such as a TV).
Dierent display devices support dierent projection protocols. Therefore, the projection
method may vary. Choose a suitable method based on the protocol supported by your device.
For details about the supported projection protocols, refer to the product manual or
contact the product manufacturer.
1 Ensure that the DVKit/Cast+/Miracast switch or the projection switch is enabled on the
display device. For details about how to turn on the switch, refer to the product manual or
contact the product manufacturer.
2 Swipe down from the upper right edge of your phone to display Control Panel and touch
.
3 In Control Panel, touch
to expand the shortcut switches panel and touch Wireless
Projection. Your phone will then start searching for available external displays.
You can also go to Settings > More connections > Easy Projection to enable Wireless
projection.
4 Touch the device that you want to project your phone to from the detected devices.
By default, after the connection is successful, banner notications for incoming calls,
messages, and alarms, and Multi-Window are only displayed on your phone instead of the
external display. To show notications on the external display, touch and turn o the
switch for Hide notications.
The Hide notications feature is only supported on certain device models.
To exit wireless projection, go to > Disconnect.
Phone Projection Using a Wired Connection
You can project your phone screen on a large display (for example, a TV) using a wired
connection.
It is recommended that you purchase the accessories from authorized channels.
Projection Using a Type-C Cable
1 Prepare a Type-C cable.
Use a Type-C to HDMI, Type-C to DP, or Type-C to MiniDP cable depending on your large
display.
Smart Features
40