Huawei P50 Pro - Sounds & Vibration

Switch Between Portrait and Landscape Orientation
Swipe down from the upper right edge of the screen to display Control Panel and touch
to expand the shortcut switches panel. Then enable Auto-rotate.
Sounds & Vibration
Do Not Disturb Mode
Do Not Disturb helps you prevent interruptions when you need to focus. When this mode is
enabled, calls and messages will be muted and banner
notications will not be displayed.
Enable or Disable Do Not Disturb
You can enable or disable Do Not Disturb using the following methods:
• Swipe down from the upper right edge of the screen to display Control Panel and touch
to expand the shortcut switches panel. Enable or disable Do Not Disturb. You can
touch and hold Do Not Disturb to access the settings screen.
• Go to Settings > Sounds & vibration > Do Not Disturb and enable or disable Do Not
Disturb.
Once Do Not Disturb is enabled, a moon icon (
) will be displayed in the status bar. To
check for notications, swipe down from the status bar to open the notication panel, or go
to the lock screen. Swipe left on a notication and touch to snooze the notication.
When receiving incoming calls, notications, and messages, your phone will be muted and
will not automatically turn on its screen or display banner notications.
Set a Schedule for Do Not Disturb
1 Go to Settings > Sounds & vibration > Do Not Disturb and disable Do Not Disturb.
2 In the Scheduled list, enable the switch next to a time period for when you want to
enable Do Not Disturb. Your phone will then enter Do Not Disturb mode at the specied
time.
3 You can touch the time segment to customize the parameters, such as changing the time
range and adjusting the repeat frequency.
4 Touch Add to add a new time period.
Make Exceptions in Do Not Disturb Mode
While in Do Not Disturb mode, you can enable your phone to ring for calls and messages
from certain sources so you don't miss anything important.
Go to Settings > Sounds & vibration > Do Not Disturb, and enable Do Not Disturb or
Scheduled. Then you can:
Settings
145