Huawei P50 Pro - Page 65

• Turn the ash on or o: Touch and select (Auto), (On), (O), or
(Always on).
If you select
(Auto) and the camera detects that you are in a dimly lit
environment, a ash icon will appear in the viewnder and the ash will be
automatically turned on when you take a photo.
These features may not be available in some camera modes.
3 Touch the shutter button to take a photo.
Front Camera Autofocus
When taking a sele using the front camera, your phone will automatically recognize the
subject's face in the viewnder and make sure that the eyes are in focus.
1 Open Camera.
2 Select Photo, Portrait, or Video, and touch
to switch to the front camera.
3 Align the front camera with the subject's face. When the camera detects a face, the focus
frame will be displayed in the viewnder.
4 Touch the shutter button to take a photo or start recording a video.
Some shooting modes do not support the eye detection feature with the front camera.
Use the Floating Shutter to Take Photos
You can enable the oating shutter to display it in the camera viewnder, and drag it
anywhere you like to take photos quickly.
1 Go to Camera >
and enable Floating shutter.
2 The oating shutter will then be displayed in the viewnder. You can drag it anywhere you
like.
3 Touch the
oating shutter to take a photo.
Take Burst Photos
Use Burst mode to take a sequence of photos in quick succession so you can choose the best
one.
1 Open Camera, select Photo mode, and make sure the rear camera is in use.
2 Press and hold the shutter button or one of the Volume buttons to take burst photos.
When shooting, you'll see a number in the viewnder, which indicates how many photos
you've taken so far.
3 Release your nger to stop shooting.
Camera and Gallery
61