Huawei PowerCube 500 - Page 9

9
10
Installing Batteries and Battery Cables
Installing Lead-Acid Batteries and Cables
10.1
Installing the TCB-60C and Cables
1. Install cables at battery terminals. 2. Remove the battery baffle bars.
3. Install the two
inner batteries
and reinstall
the battery
baffle bars.
Install the negative
battery cable before
installing the positive
battery cable.
4. Install the two outer batteries and reinstall
the battery baffle bars.
5. Install battery cables.
NOTICE
Installing the TCB-100C/FCB-100B and Cables
1. Remove the battery baffle bars.
2. Install batteries and reinstall the baffle bars.
3. Install copper bars between batteries.