Need help?Do you have a question about the Huawei RRU3942 and is the answer not in the manual?
General| Brand | Huawei |
|---|---|
| Model | RRU3942 |
| Category | Accessories |
| Language | English |
Describes the process of installing DC RRU3942 and RRU3642.
Lists the product versions related to RRU3942 and RRU3642.
Identifies base station installation engineers as the target audience.
Details the changes made in the RRU3942&RRU3642 Installation Guide.
Before the installation, you must be familiar with reference documents.
You must prepare the following tools and instruments before the installation.
Onsite personnel must be qualified and trained.
This section describes the exterior and dimensions of an RRU.
This section describes ports on the RRU panels.
This section describes six indicators on an RRU.
An RRU can be installed on a pole, U-steel, angle steel, wall, or IFS06.
Describes clearance and spacing requirements for RRU installations.
Describes procedures and precautions for hoisting an RRU and its mounting kits.
Describes the procedure for hoisting fiber optic cables onto a tower.
Describes the procedure for hoisting power cables onto a tower.
Describes the bracket assembly and the attachment plate for an RRU.
Details how one or more RRUs can be installed on a pole.
Describes installing the RRU on U-steel.
Describes installing the RRU on angle steel.
Describes the procedure and precautions for installing the RRU on a wall.
Describes the procedure and precautions for installing an RRU on an IFS06.
Cables must be routed according to specified requirements to prevent signal interference.
Describes cable connections for single and multiple RRUs.
Describes the process of installing RRU cables.
Lists RRU cables and their connections.
Describes the procedure for installing an RRU PGND cable.
Describes the procedure for installing an RRU RF jumper.
Describes the procedure for installing an inter-RRU RF cable.
Describes procedures for installing AISG cables.
Describes the procedure for opening the cover plate of an RRU cabling cavity.
Describes the procedure for installing an RRU power cable.
Describes the procedure for installing a CPRI fiber optic cable.
Describes the procedure for installing an RRU alarm cable.
Describes the procedure for closing the cover plate of an RRU cabling cavity.
Describes adding a tool-less female connector to the RRU power cable.
To Next Page
