Need help?Do you have a question about the Huawei RRU3971 and is the answer not in the manual?
General| Type | Remote Radio Unit |
|---|---|
| Technology | LTE |
| Operating Temperature | -40°C to +55°C |
| Operating Voltage | -48 V DC |
| Cooling | Natural convection |
| Mounting | Pole or Wall Mounting |
| Frequency Bands | 1800 MHz, 2100 MHz |
| MIMO | 2x2 |
| Interface | CPRI |
Lists all documents required for RRU installation, including hardware descriptions and user guides.
Details the specific tools and instruments needed for the RRU installation process.
Outlines the necessary qualifications, training, and safety awareness for installation personnel.
Describes the external appearance and dimensions of the RRU unit.
Details the various ports on the RRU panels and their functions.
Explains the meaning and status indications of the RRU's onboard indicators.
Discusses different mounting locations and conditions for RRU installation.
Specifies the necessary clearances around the RRU for proper installation and maintenance.
Provides procedures and precautions for safely lifting RRUs and their mounting kits onto a tower.
Details the safe procedure for hoisting fiber optic cables onto a tower.
Details the safe procedure for hoisting power cables onto a tower.
Describes the bracket assembly and attachment plate components for RRU mounting.
Step-by-step instructions for installing RRUs on a pole, including single and multiple units.
Provides procedures and precautions for installing RRUs on U-steel supports.
Provides procedures and precautions for installing RRUs on angle steel supports.
Details the procedure and requirements for mounting RRUs securely onto a wall.
Describes the installation process for RRUs on an IFS06 mounting system.
Guidelines for cable routing, bending radii, binding, and security to prevent interference.
Illustrates the correct cable connections for single-mode and multimode RRUs.
General overview of the procedures for installing various RRU cables.
Table listing RRU cables, their connectors, and installation positions.
Procedure for installing the RRU Power and Ground (PGND) cable.
Steps for connecting and waterproofing the RRU RF jumper to the antenna system.
Procedure for connecting the RRU power cable to the RRU and power device.
Instructions for connecting AISG multi-wire and extension cables.
Procedure for correctly closing the RRU cabling cavity cover plate.
Procedure for installing the RRU alarm cable to external alarm devices.
Steps to safely open the RRU cabling cavity cover plate for access.
Procedure for installing the CPRI optical cable between BBU and RRU.
Procedure for adding a tool-less female connector to the RRU power cable.
To Next Page
