This module can only be used on a switch running V200R009C00 or a later version. A
switch running an earlier version may fail to obtain information about this module.
Single-ber bidirectional (BIDI) optical modules must be used in pairs. For example,
SFP-10G-ER-SM1270-BIDI must be used with SFP-10G-ER-SM1330-BIDI.
9.7 10GE-CWDM SFP+ Optical Modules
9.7.1 SFP-10G-ZCW1471
Table 9-41 Technical
specications
Item Description
Transceiver form factor SFP+
Transmission speed 10GE
Center wavelength
(nm)
1471
Standards compliance 10G-CWDM
Connector type LC
Applicable cable and
maximum transmission
distance
Single-mode ber: 70 km
Transmit power (dBm) 0 to 4.0
Maximum receiver
sensitivity (dBm)
-23.0
Overload power (dBm) -7.0
Extinction ratio (dB) 8.2
Operating temperature 0°C to 70°C (32°F to 158°F)
Part number 02310SSG
9.7.2 SFP-10G-ZCW1491
Table 9-42 Technical
specications
Item Description
Transceiver form factor SFP+
S1700 Managed Series Ethernet Switches
Product Description
9 Optical Modules
Issue 18 (2020-10-23) Copyright © Huawei Technologies Co., Ltd. 225
To Next Page
Loading...
Need help?
General