2. Close the eject levers to ensure that the card is inserted completely in the chassis, and then
fasten the captive screws.
Installing a Rear Card
CAUTION
Before installing a rear card, remove the filler panel from the rear card slot.
Install the rear subcard in the rear card slot on the chassis, raise the ejector lever, and fasten the
captive screws.
S2700&S3700&S5700&S6700 Series Ethernet Switches
Quick Start Guide
2 Device Installation
Issue 12 (2013-07-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
22
To Next Page
Loading...
