Step 3 Set up a connection.
See Figure 3-2. Enter the name of the new connection in the Name text box and then choose
one icon. Then, click OK.
Figure 3-2 Setting up a connection
Step 4 Configure an interface for connection.
In the Connect To dialog box, as shown in Figure 3-3, select an interface from the drop-down
list box according to the actual interface on the PC or terminal. Next, click OK.
Figure 3-3 Configuring the interface for connection
S2700&S3700&S5700&S6700 Series Ethernet Switches
Quick Start Guide 3 Logging in to the Device
Issue 12 (2013-07-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
35
To Next Page
Loading...
