Table 3-12 Attributes of a console port
Attribute Description
Connector type RJ45
Standards
compliance
RS-232
Working mode Duplex Universal Asynchronous Receiver/Transmitter (UART)
Baud rate 9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s
Default value: 9600 bit/s
Mini USB port
The mini USB port is connected to a console for on-site configuration. When both the Mini
USB and console port have a cable connected, only the Mini USB port works.
Indicator Description
The S5700-10P-PWR-LI-AC has similar indicators to those of the S5700-28X-PWR-LI-AC,
except that the S5700-10P-PWR-LI-AC does not have RPS and STCK indicators and two GE
optical ports do not support the Speed mode. For details, see Indicator Description.
Power Supply Configuration
The S5700-10P-PWR-LI-AC has a built-in power module and does not support pluggable
power modules. It provides a 124 W internal power module for PoE. The switch provides full
PoE power supply (IEEE 802.3af) on 8 ports and full PoE power supply (IEEE 802.3at) on 4
ports but cannot connect to an RPS power supply.
Figure 3-5 shows the power supply mode of a built-in AC PoE power module (PWR). The
PWR module receives AC power from an external power source and provides two outputs: 12
V and -53 V. The 12 V output is provided for the chassis, and the -53 V output is provided for
PDs.
S5700 Series Ethernet Switches
Hardware Description
3 Chassis
Issue 24 (2016-08-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
82
To Next Page
Loading...
Need help?
General
