l Enable the DHCP option82.
huawei(config)#dhcp option82 enable
6. Configure the multicast service.
huawei(config)#interface giu 0/19
huawei(config-if-giu-0/19)#native-vlan 0 vlan 100
huawei(config-if-giu-0/19)#quit
huawei(config)#multicast-vlan 100
huawei(config-mvlan100)#igmp mode proxy
Are you sure to change IGMP mode?(y/n)[n]:y
huawei(config-mvlan100)#igmp uplink-port 0/19/0
huawei(config-mvlan100)#quit
huawei(config)#btv
huawei(config-btv)#igmp uplink-port-mode mstp
Are you sure to change the uplink port mode?(y/n)[n]:y
huawei(config-btv)#quit
huawei(config)#multicast-vlan 100
huawei(config-mvlan100)#igmp program add name program1 ip 224.1.1.1 sourceip
10.10.10.10
huawei(config-mvlan100)#igmp program add name program2 ip 224.1.1.2 sourceip
10.10.10.10
huawei(config-mvlan100)#igmp program add name program3 ip 224.1.1.3 sourceip
10.10.10.10
huawei(config-mvlan100)#quit
huawei(config)#btv
huawei(config-btv)#igmp profile add profile-name profile0
huawei(config-btv)#igmp profile profile-name profile0 program-name program1
watch
huawei(config-btv)#igmp profile profile-name profile0 program-name program2
watch
huawei(config-btv)#igmp profile profile-name profile0 program-name program3
preview
huawei(config-btv)#igmp user add port 0/2/31 auth
huawei(config-btv)#igmp user bind-profile port 0/2/31 profile-name profile0
huawei(config-btv)#quit
huawei(config)#multicast-vlan 100
huawei(config-mvlan100)#igmp multicast-vlan member port 0/2/31
Step 12 Configure the subtending multicast service.
1. Configure the upstream port.
The upstream port is already configured in Step 11.6.
2. Configure the IGMP proxy.
The IGMP proxy is already configured in Step 11.6.
3. Configure the program library.
The program library is already configured in Step 11.6
4. Configure the multicast for the subtending port.
l Specify a subtending port.
huawei(config-btv)#igmp cascade-port 0/19/1
l Modify a subtending port.
huawei(config-btv)#igmp cascade-port modify 0/19/1 static enable
l Add programs for the static subtending port.
huawei(config-btv)#igmp static-join cascade-port 0/19/1 ip 224.1.1.1 vlan
100
huawei(config-btv)#igmp static-join cascade-port 0/19/1 ip 224.1.1.2 vlan
100
huawei(config-btv)#igmp static-join cascade-port 0/19/1 ip 224.1.1.3 vlan
100
huawei(config-btv)#quit
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
7 Example: Subtending Networking
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
529
To Next Page
Loading...
Need help?
General
