Huawei SmartLi 100Ah - Page 108

PowerCube 5000
User Manual (SmartLi 100Ah)
5 Power-on Commissioning
Issue 02 (2020-03-17)
Copyright © Huawei Technologies Co., Ltd.
100
Figure 5-1 Settings Wizard
Table 5-2 Settings Wizard
Item
Parameter
Setting
Language
N/A
Select a desired language.
Time
N/A
Set to the local time and date.
System
Param.
Single/Parallel
Set this parameter as required.
Parallel ID
(displayed in a
parallel system)
When the value is set to 1, the cabinet is the master
cabinet. When the value is set to 2, the cabinet is
the slave cabinet.
DG Number
Set this parameter as required.
NOTE
Changing the number of DGs will restore the following
parameters to their default values: AC load connection
voltage (Battery module), AC load disconnection voltage
(Battery module), Battery module charging voltage,
Module battery LVD voltage, and Module battery LVD
voltage.
Battery Type
Number of cabinet's
HSU
Output Volt Level
(V)