Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-29 Connecting the plug
Step 4 Crimp the plug using a crimping tool.
Step 5 Secure the plastic housing to the plug, as shown in Figure 5-30.
Figure 5-30 Connecting the plastic housing
Step 6 Insert the seal ring into the plastic housing and secure the coupling nut to the plastic housing,
as shown in Figure 5-31.
Figure 5-31 Connecting the seal ring and coupling nut
Step 7 Secure the sealing nut to the plastic housing, as shown in Figure 5-32.
Figure 5-32 Connecting the sealing nut
Step 8 Insert the plug into the RS485 port on the SUN2000, and tighten the coupling nut.
----End
To Next Page
Loading...
