Prerequisites
l You have used the cable to connect the video output port of the presentation source to the
input port of your endpoint.
l You have enabled the presentation sharing function.
Background
During a dual-stream conference using H.239, two independent channels of video streams (that
is, the video and presentation) can be transmitted.
If Presentation plug-and-share is set to Enable, your endpoint automatically shares
presentations with remote sites once presentation input is detected.
Procedure
Press
on the remote control to share a presentation.
To stop sharing a presentation, press
on the remote control.
To select a presentation source or stop sharing a presentation, you can also select on the
option bar and then the desired operation.
7.9 Sharing a Presentation Using the Air Content Sharing
Client
You can download the air content sharing client from the endpoint web interface. With this
client, you can connect the endpoint to your computer and share your computer desktop as a
presentation without the use of any physical ports.
Prerequisites
You are not logged in to your desktop remotely. (The air content sharing client is unavailable if
you are logged in to your desktop remotely.)
The air content sharing client is installed on a computer running any of the following operating
systems:
l 32-bit Windows Vista
l 64-bit Windows Vista
l 32-bit Windows 7
l 64-bit Windows 7
l 32-bit Windows XP
Context
If the computer and endpoint are on the same LAN, you can share your computer desktop as a
presentation without using a VGA cable to connect the video output port on the computer to the
presentation input port on the endpoint.
HUAWEI TE40&TE50&TE60 Videoconferencing Endpoint
User Guide
7 Experiencing a Conference
Issue 02 (2014-01-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
32
To Next Page
Loading...
Need help?
General
