Huawei UPS2000-G-10KRTL User Manual

Figure 4-25 SNMP card settings
Table 4-15 SNMP card settings
Item Description Default
Value
Value Range
IP alloc. Species the DHCP address
allocating mode. After the
allocating mode is set to
Automatic, an Allocating
dialog box is displayed on the
screen. If allocation succeeds,
the new IP address is
displayed. If allocation fails,
the IP address restores to the
default one: 192.168.0.10. If
the allocating mode is set to
Automatic, you can only
query the IP address but
cannot set the IP address
manually.
NOTE
If the optional card does not
support the DHCP function, the
allocating mode cannot be set to
Automatic on the UPS
monitoring module. You are
advised to upgrade the SNMP
card.
Manual
Manual,
Automatic
IP
address
Set an IP address for the
SNMP card.
192.168.0.10 1.0.0.0–
223.255.255.2
55
Subn.
mask
Set a subnet mask for the
SNMP card.
255.255.255.
0
-
Gateway Set a gateway address for the
SNMP card
192.168.0.1 1.0.0.0–
223.255.255.2
55
2. If a Modbus card is connected, the following parameters are displayed:
UPS2000-G- (6 kVA-20 kVA)
User Manual 4 Control Panel
Issue 18 (2021-07-16) Copyright © Huawei Technologies Co., Ltd. 58

Huawei UPS2000-G-10KRTL Specifications

General

Brand	Huawei
Model	UPS2000-G-10KRTL
Category	UPS
Language	English