Huawei V100R001 - Page 89

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
82
Indicat
or
Col
or
Name
Status
Description
Blinking
The indicator blinks at super short
intervals for 0.5s (blinking at 10 Hz,
on for 0.05s and then off for 0.05s)
and then turns off for 0.5s. The
cycle lasts for 10s.
ALM
Red
Alarm indicator
Steady on
A system failure alarm is generated.
Off
No system alarm is generated.
RF_Z
Gree
n
Wireless
communication
status indicator
Steady on
No network parameters exist, or a
network is to be created.
Blinking at
long intervals
A network is set up, and no node
access is allowed (the indicator
blinks at 0.5 Hz, on for 1s and then
off for 1s).
Blinking at
super short
intervals
A network is set up, and node
access is allowed (the indicator
blinks at 10 Hz, on for 0.05s and
then off for 0.05s).
Blinking
intermittently
at super short
intervals
The access actuator is searching for
a network (the indicator blinks at
super short intervals for 0.5s and
then turns off for 0.5s).
Communications Ports
The access actuator provides one DO port (LOCK/GND) and one DI port (GATE/GND).
Table 3-51 lists the LOCK/GND/GATE/GND port pin definitions.
Table 3-51 LOCK/GND/GATE/GND port pin definitions
Item
Description
LOCK/GND
(control
magnetic
locks) pin
sequence
LOCK
12V_OUT
GND
GND
GATE/GND
(door status)
pin sequence
GATE
DI1
GND
GND