2-4 Issue 01 (2012-10-26)
Indicator Color Status Indicates
Internet Green On
The router is working in routing mode.
The WAN connection is set up and an
IP address has been obtained.
No data is being transmitted.
Green Blinking
The router is working in routing mode.
The WAN connection is set up.
Data is being transmitted.
Red On
The router is working in routing mode.
The WAN connection is set up and no
IP address is obtained.
The router is working in routing mode,
but no data is being transmitted.
Red Blinking
The router is working in bridge mode.
The WAN connection is set up.
Data is being transmitted.
- Off
The router is powered off or no WAN
connection is set up.
WLAN Green On
The WLAN function is enabled, but no
data is being transmitted on the WLAN.
Green Blinking
The WLAN function is enabled and data
is being transmitted on the WLAN.
- Off The WLAN function is disabled.
WPS Green On
A wireless connection is set up between
the router and a wireless client through the
WPS function.
This state lasts 300 seconds.
Green Blinking
The router is attempting to set up a
wireless connection with a wireless client
(such as a computer with a wireless
network adapter installed) through the
WPS function.
This state lasts no more than 2 minutes.
- Off The WPS function is disabled.