Issue 01 (2012-10-26) 4-5
To protect your router from unauthorized access, change the user name and password
after the first login. For
details, see chapter 7.1 “Changing the Administrator Password of
the Web-based Configuration Utility”.
The first time you log in to the web-based configuration utility, a setup wizard is
displayed. To skip the wizard and go immediately to the configuration page, click Here
when the following message displays: Click Here to enter the advanced configuration
page.
4.2 Using the Setup Wizard
After logging in to the web-based configuration utility, you can use the setup wizard
provided by the utility to quickly configure the router.
When you configure the router for the first
time, you can view the setup wizard page
after logging in to the utility. To configure the router through the setup wizard:
Step 1
Log in to the Web-based configuration utility.
Step 1
Choose the network connection type and configure the network connection parameters.
Choose the connection type based on the application scenario. The Table 4-1describes
the connection types.
Table 4-1 Configuring the Internet access parameters
Application Scenario Connection Type
The user name and password are provided by your service
provider.
PPPoE (recommended)
The user name and password are provided by your service
provider. Set up a dial-up connection on one computer
only.
Bridge
Certain parameters, such as the static IP address and DNS
server address, are provided by your service provider.
Static IP
No parameters are provided by your service provider. The
To Next Page
Loading...
Need help?
General
