Issue 01 (2012-10-26) 4-7
If you choose PPPoE, Static IP, or DHCP, the computer automatically connects to the
Internet as long as the router is working properly.
If you choose Bridge, use the dial-up software on the computer to set up a dial-up
connection each time you access the Internet.
Step 2
Enter the service set identifier (SSID) and key, and click
Next
.
----End
The default SSID and key are printed on the router's rear label. To protect your wireless
network from unauthorized access, change the SSID and key promptly. For
details, see
chapter 6.3.2 “Changing the Name of a WLAN” and 6.3.3 “Using Secure Encryption”.
To Next Page
Loading...
