6-28 Issue 01 (2012-10-26)
1. Log in to the Web-based configuration utility of router A.
2. In the navigation tree, choose Basic > WLAN.
The WLAN configuration page is displayed.
3. Click WLAN.
4. Select Enable WLAN.
5. Set the following parameters.
− Channel: 1
− SSID Index: SSID1
− SSID: mySSID
− Security: WPA-PSK/WPA2-PSK
− WPA pre-Shared key: MyPassword@2012
− WPA encryption: AES
6. Click Submit.
Step 3
Configure the WDS function of router A.
1. In the navigation tree, choose Basic > WLAN.
The WLAN configuration page is displayed.
2. Click WLAN WDS.
3. Select Enable.
4. Select Repeater for WDS Mode.
5. Click New.
6. Select mySSID for Select SSID.
To Next Page
Loading...
