To add apps you wish to use in Ultra Power Saving mode, touch and select the apps
from the list. You can touch to remove the apps or touch in the upper right corner
to exit Ultra Power Saving mode.
• When the battery level is not extremely low, but you would still like to save power, enable
Power Saving mode. The
icon will then be displayed in the status bar.
Ultra Power Saving mode is not available on some devices. If this option is not
displayed, it indicates that your device does not support the feature.
Enable Performance Mode
Performance mode adjusts power settings to deliver maximum performance. This will cause
the battery to drain more quickly, especially when graphic-intensive apps are used.
When the battery level is sucient, go to Settings > Battery (or Optimizer > )
and enable Performance mode.
The icon will then be displayed in the status bar.
Performance mode is not available on some devices. If this option is not displayed in
Optimizer, it indicates that your device does not support the feature.
Battery Settings
You can also set whether to display the battery percentage in the status bar, and whether to
maintain a network connection when the phone screen is turned
o.
Display Battery Percentage in the Status Bar
Go to Settings > Battery (or Optimizer > ), touch Battery percentage, and
choose to display the battery percentage, either inside or outside of the battery icon in the
status bar.
Stay Connected While Your Device is Sleeping
If you would like your phone to continue to receive messages or download data while it is in
sleep mode, set your phone to stay connected when it sleeps. Please note that this may
increase power consumption.
On the Battery screen, touch More battery settings, then enable or disable Stay connected
while asleep as required.
Storage
Settings
94
To Next Page
Loading...
Need help?
General
Weight and Dimensions
