To Next PageTo Next Page
Need help?Do you have a question about the Huber CC902 and is the answer not in the manual?
General| Switching Current | 16 A |
|---|---|
| Relative Humidity | 80% |
| Heating Power | 2.0 kW |
| Power Supply | 230V 1~ 50/60Hz |
| Switching Voltage | 250 V |
| Ambient Temperature | 5°C to 40°C |
Steps for initial setup and operation of the CC thermostat.
Explanation of the basic operation modes and controls.
Procedure for configuring the over-temperature safety feature.
Details on the POCO potential-free contact alarm connector.
Description of the AIF Reg-E-Prog socket for analogue signals.
Details on the ECS socket for external control signals.
Wiring and function of the RS232/RS485 serial interface.
How settings are made for various interfaces.
Explains safety symbols and their meanings.
Guidelines for proper use and general safety.
Overview of the temperature control machines.
Responsibilities of the person in charge of the unit.
Qualifications and age for operating personnel.
Tasks and responsibilities of the machine operator.
Definition and requirements for the work area.
Classification and technical requirements for safety devices.
Additional protection features like auto-start and alarms.
Conditions for safe and proper operation.
Factors affecting performance and operation.
Guidelines for placing and securing the unit.
Information and recommendations for thermal fluids.
Overview of the CC-Pilot control interface.
Details on the various information displays.
Functionality of the internal clock and programmable events.
Different methods for operating the CC unit.
How to operate using the rotary knob.
Operation via the numerical keypad.
Overview of the main menu functions.
Details on the compact menu structure and options.
Functions available within the comfort menu.
Functions related to the Com.G@te interface.
Explains function numbers and their associated meanings.
How to set up custom user menus.
How to select and operate user menus.
Instructions for connecting the unit to power.
Steps for initial startup of the unit.
Instructions for connecting and using water cooling.
Using the unit as a bath thermostat.
How to connect external systems.
Procedure for turning on the unit.
How to configure the over-temperature safety feature.
How to set the allowed temperature range.
Procedure for setting a desired temperature.
How to begin temperature regulation.
Procedure for stopping temperature control.
Steps for filling and removing air from the system.
Instructions for emptying the system and replacing fluid.
Overview of RS232/SERIAL, Com.G@te, Web.G@te modules.
Details on the RS232/SERIAL interface.
Shared functions between Com.G@te and Web.G@te.
Specific operational aspects of Com.G@te.
Specific operational aspects of Web.G@te.
Types and handling of warnings and alarms.
How error messages and codes are presented.
List of error codes and their meanings.
Procedure for replacing electronics or using as remote control.
General maintenance procedures.
Steps for cleaning and preparing for repair.
Procedures for taking the unit out of service.
Guidelines for safely transporting the unit.
Instructions for environmentally sound disposal.
