Hubner EGS 40 K - User Manual

English
Translation of the original Operating and Assembly Instructions EGS40_MANUAL-en_R6(2018-11-07)ID74528.docx
ID 74528
Operating and Assembly Instructions
Electronic Overspeed Switch
EGS
®
40
Option S (integrated EGS
®
4 technology with incremental encoder type FG)
Read the Operating and Assembly Instructions prior to
assembly, starting installation and handling!
Keep for future reference!

Summary

Safety Guidelines

Owner Responsibility and Intended Use

Hazards and Protective Measures

Details dangers from electrical shock, rotating shafts, and restart, including required PPE.

Technical Data

Type Key

Mechanical Specifications

Electrical Outputs and Connected Loads

Covers connected loads, switching voltage, current, and electrical output types.

Speed and Switching Performance

Specifies programmable speeds, hysteresis, switching delay, and monitoring functions.

Degree of Protection

Outputs and Integrated Encoder Option

System Functionality

Block Diagram and Description

Handling and Storage

Installation and Commissioning

Introduces different device versions and outlines general installation tasks.

Software and Programming

Computer Setup and Driver Installation

Outlines system prerequisites and steps for installing the necessary software driver.

Software Launch and Configuration

Guides through launching the software, setting COM ports, and managing user accounts.

Device Programming and Operation

Explains reading, saving, testing, locking device parameters, and monitoring functions.

Faults and Testing

Safety During Fault Correction

Addresses safety precautions during troubleshooting and lists common malfunctions and causes.

Maintenance Testing Schedule

Connection Diagrams

Electrical Connection Schematics

Hubner EGS 40 K Specifications

General

Brand	Hubner
Model	EGS 40 K
Category	Switch
Language	English